Your USB ports not working well? So, let’s fix them, just read the following post related to how to fix non working usb ports. And you problem will be solved within minutes.
All of us know that’s how much USB cables are common! The best examples of it is a daily charging cable of your mobile devices, now every charging adapter comes with the USB charging port. And another example is the data sharing device like pendrive’s and card readers.
Before we start let’s take a short look at what are the USB ports?
USB (Universal Serial Bus) is a classic cable connection interface usually for the personal computers and other small electronic devices. Most common use of the USB cable is to transfers the digital data quickly in short distances.
- What are the Common Causes for USB Ports Not Working Problem?
- What to do if the USB ports not working!
What are the Common Causes for USB Ports Not Working Problem?
Due to the regular use of usb ports everyone faces problems like USB ports not working once in a pc’s lifetime.
Most of the times usb ports of laptop’s or desktops gets damaged due to lots of use. Also many times laptop and other electronic devices does not support the new hardware, Some peoples have a problem with small hardware issues on their devices, incorrect software configurations, small problems with the cables in the connection.
Another problem for USB not working is unsuited connected devices and unnecessary extension cables. These are some common causes with the USB’s, So let’s find the solution in the following article.
Read Also : –
What to do if the USB ports not working!
1] Restart the Computer : Physical check of USB Ports.
Sometimes your desktop computer not scan USB hardware properly and then starts to make a problem when you are going to connect USB, at this situation just turn off your computer for a few seconds and turn it on again.
If the main problem behind this USB dis-connectivity is this then, when turning on or restart your computer devices then it will scan that USB hardware properly and then you are able to use it. In case if the problem was not get solved then hold down the power button of your computer for 30 seconds, it will discharge the capacitors and then your USB port is again starting to work.
Sometimes the USB devices/ports, cables are not performed well and stops working with your all devices therefore first check that your devices or the USB’s are really working or not. In some cases the dust particles are easily went through the open mouth on port and then simply placed and stuck on the connecting places of port, and becomes obstacle in the connecting devise so, before connecting devices with each other, blow a short air stroke with your mouth on both male and female port of USB.
Also Read: – Best Linux Distros in 2019
You can also do the basic thing like this, you can swap USB cables, or plug USB devices in a different port. The basic swapping methods are also the best ways to check that your USB devices are working or not.
2] Check Device Manager
If the above way never solves your problem then let’s go for a bit of deeper solution, now you have to check the device manager of your computer. Now first we check if the USB ports not working windows 10, follow following steps.
1] Right click on the “start menu”, then click on the “run” option
2] Now type “demgmt.msc” in the run open bar, and click “ok”, then device manager pop-up there.
3] After that you can see the option, “universal serial bus controllers” in the window of a device manager.
4] Expand the options of “universal serial bus controllers” by clicking on a small arrow beside it.
5] Before doing anything first again check for any hardware changes on your device by clicking scan for hardware changes symbol (this symbol is mostly available below the help tab in the device manager you can identify it by looking for a computer icon with magnifying glass symbol on it.) if your computer scan your USB hardware then you are lucky and after that you have not need to do anything, but if it will not then follow the next steps.
6] Then uninstall all the options that are available with the “host USB controllers”, uninstall all “host USB controllers”
7] now, turn off your computer and again turn it on, and that’s it your problem is get solved after this small steps.
When you uninstall those drivers and restart your computer then your computer forcefully gets choose that USB controllers which are not responding. If the USB ports not working windows 7, 8 or even in the XP then, you can follow the same above steps.
3] Inspect Power Management Settings
Sometimes, the power saving mode on your computer stops to provide the power to the saving power ineffective way. Therefore you cannot use USB device in power saving mode, and once the power saving mode gets disable then computer again start to provide power to USB ports. In some cases, the computer fails to switch on the power for USB ports, at this situation you need to power on it manually to power it on check out these following steps.
1] Open the device manager and again expands the tab “universal serial bus controllers “
2] Double click on the option which contains keyword “USB root hub”
3] Then click on the “power management” tab in the newly popped-up window.
4] Now, click on the checkbox which tells us that “allow the computer to turn off this device to save power”.
5] Then repeat this step for every entry which has a keyword “USB root hub”. So, that’s it the whole process is done and you can test USB ports by connecting.
4] Update Your System or the USB Drivers
This is another option which is applicable for both mac and windows users, you can fix the USB drive not working by just upgrading their drivers. For the users of the windows users again open the device manager through the shortcut of RUN command and then follow these following steps.
1] Expand the universal serial bus controllers
2] Right Click on the first entry or option in the expanded list
3] Now, click on the “search automatically for updated driver software”
4] Repeat this process with every driver on the list. Restart your computer.
For the Mac users, If the laptop USB ports not working, then check it:-
1] Open the app store on your MAC
2] Locate to the updates tab on the toolbar
3] click on the update all tab.
4] And restart your system.
5] Reset the System Management Controllers on MAC OS
If you want to solve the problem of USB ports not working mac then check the quick fix for how to reset USB ports on mac and following steps.
1] Shut down the computer and plug in the power adapter
2] Press and hold the keys shift + control + option and then press the power switch
3] Now release all key at the same time with the power button
4] Check that, is the USB fix well or not?
5] Once the mac is starting, the system management controllers have already reset. So, this is
So, this is how to fix USB ports for both Windows and MAC users, we hope that you can utilize the best and easiest way for your problem. Was this article is helpful for you? If yes! Then, please share it with your friends and family.
If there are any common topics to cover-up by us in our next article then please tell us in the comment section. Stay tuned with us for news, tips and tricks, reviews and more updates for the problem like USB ports not working or other help about tech things.